PRODUCT SEARCH

Lubrication Type

Lubrication Pumps

Manual Lubrication

Automatic Lubrication 

Electric Lubrication

DB Lubricator Pump

Lubrication Station

Pneumatic Pump

Oil Pumps

Gear  Pumps

Trochoid Pumps

Typical System 

Automotive chassis lubrication

Precise oiling device

Chain  lubricators

Open gear lubrication 
Air/Oil assembly unit
Single point lubrication 

Central unit

Meter and Control Units

Series Distributors

Accessories

Filters

Controllers

Hydraulic Fittings

Filler Equipment

Air Grease Filler

Manual Grease Filler

 

LINK

baidu

google

sohu

sina

yahoo

zhongsou

MSN

alibaba

sogou

hc360

 

 

南京际润机械科技有限公司

中 文

Nanjing Jilube Machinery Technology Co., Ltd  

English

HOME

ABOUT US ABOUT PRODUCT SUPPORT NEWS CONTACT US

AP1000 Air Lubrication Pump

  I, an overview of

     AP100 Pneumatic lubrication pump is a kind of using compressed air as a source of power piston pump. The pump is intermittently working pump, input pressure 0.4-0.8MPa, the pump displacement 0-4ml/cyc, if you need a smaller displacement, it can adjust screw clockwise rotation, displacement will be reduced gradually.

   The pump with oil level switch, can be a low oil level signal output. Can be used for single-damping and displacement systems. Recommended oil viscosity for the N20-N200.

   ㈡、   Ii, the working principle

    AP100 Pneumatic lubrication pump gas source is treated through the solenoid valve receiving lubricant pump inlet 1. On-off solenoid valve controlled by the host PLC. Solenoid valve power, the gas source into the lubrication pump cylinder chamber 2 to promote the piston to overcome the spring down. Cylinder lubricating oil inside the compression chamber 3 after the closure of oil-absorbing one-way valve 4, through the oil pressure one-way valve 5 from the oil discharge port 6, to the system oil. Solenoid valve power, the cylinder chamber 2 connected to the atmosphere, under the action of the piston in the spring reset. Cylinder 3 volume expansion produced a vacuum, through the oil-absorbing one-way valve 4 from the fuel tank inhalation lubrication pump, in preparation for the next job. When the oil level down to lower position, liquid level switch 9 work, issue-state signals.

 

0.5 Mpa pressure displacement 0 ~ 4 2ml/cyc 1L/2L
Add: 275 shipopomiao nanjing china P.C. 210022我要啦免费统计

Phone +86 025 5263 6311   Fax: +86  025 5263 6311  

www.jilube.com E-mail:jilube@sina.com QQ1873057563